(626) 547-4260

Gray Stone-Look Shower Floor with Center Drain in Carson

Close-up of gray stone-look shower floor tiles with square center drain and wall-mounted fixtures in Carson residential home

About This Project

This shower floor in a Carson home was part of a larger bathroom remodel. The floor uses gray stone-look porcelain in a format that is large enough to look clean and minimal but small enough to accommodate the slope to the center drain without awkward cuts. Shower floor installation with a center drain requires sloping the floor from all four sides toward the drain — a 1/4-inch per foot slope is the standard, and it needs to be consistent in all four directions. We built the slope using a pre-sloped foam shower pan, which provides a reliable, consistent pitch without the variability of hand-floated mortar. The drain cover was set flush with the finished tile surface, which requires precise height calculation before the mortar bed goes in. The gray stone-look tile has a subtle texture that provides grip underfoot without being so rough that it is difficult to clean.

What We Did

01
Installed pre-sloped foam shower pan, bonded to substrate, waterproofed all seams and drain collar
02
Calculated finish tile height to ensure drain cover sits flush with finished floor surface
03
Set gray stone-look porcelain, cutting tiles to terminate cleanly at drain collar and wall base
04
Grouted, sealed, caulked wall-to-floor corners with flexible sealant

Tell Us About Your Project

Thank you — we received your request. We'll get back to you within 1 business day.